|
 |
High Intensity Composite Panel |
 |
It is a new tape of energy-saving
product, whose salient characteristics are high intensity, light
weight, heat insulation, soundproofing, fireproofing, ease of
connecting, installing easily and quickly , fixedness, and
substantial savings of time and cost. High intensity composite
wall material could be built as standard blocks, and you could
also choose special shape blocks and other components such as
plastic or aluminiun doors and windows to meet your special
need.
Sandwich sections are made from
three parts - EPS (Expanded polystyrene) as insulating wall
core, integrated galvanized steel studs for strength, and the
surfaces can be cement mixed special glue, PVC boards, marble or
fireproofing boards covered with fiberglass reinforced mesh.
It could be applied directly at
the factory and decoreted on site. Flame resistant EPS
core have such characteristics of light weight, heat insulation,
sound insulation, mothproofing and ratproofing.
It is pre-grooved for electric
wires and pluming pipe. Integrated galvanized steel studs give
the system enough strength, and ensure houses could be assembled
easily and quickly to save your time and cost.
|
 It
could be widely used in buildings, plants, cold storage and
other prefabricated house construction.
 It could be
especially suitable for tropical, frosty and earthquake
frequently countries and regions.
 It
is a new and perfect construction material, reaches the
direction of world architectural energy saving and should be the
replacement of traditional bricks and concrete and lumber.
|
Weather
Resistance:
EPS covered with
fiberglass alkali-resistant mesh and special mortar and glue, It
has particular weather resistance and durability. It will not
crack, bubble and peel when being used in ultrviolet radition,
Moisture, heat and cold situation for long time. Our Material is
durable and can resist the affects of rain, snow, wind, frost
and other bad weather.
Heat
Insulation:
Many countries recommend
or prescribe forcibly EPS as a insulation material of
construction. The core of our composite wall material is EPS, It
has the ability of self heat insulation, the building can
achieve the standard of energy-saving design without EIFS. It is
ideal for construction in both tropical and frigid countries, It
will bring you a comfortable and safe habitation. The building
which used our materials is airtight and have low vapor
transmission. That is more excellent than traditional wood and
stone materials. It also achieve the hygeian requirements when
used in cold storage construction.
Fireproofing:
The core of new
self-insulation composite wall material is fireproofing EPS, The
complete panel with finished surface is uninflammable products
and its fire proofing.
Installing Easily and Quickly:
In the reasonable span you
only need to use L-Shaped brackets or angle iron to connect with
floor and roof system. There have connection-pegs or rabbets at
the edge of each panel, It is easy to install with some bonding
glue. Our building systems utilize a single, un-seamed block of
EPS for corners or T-shaped connecting sections, eliminating
joints at these crucial points that plague other panel style
systems. Wall series is a fully structural, insulated system of
factory made sections that are easily to assembled on site.
Three workers are enough for shole construction, and only need
1/3 time. You can dramatically reduce the time to frame and
insulate. |
High
Supporting Capability:
The integrated galvanized
antirust steel construction studs for strength is prepared in the
wall, our wall panels have enough supporting capability. We can also
use different stud gauge or spacing to meet your project
requirement.
Excellent
Strength and Durability:
Integrated steel makes an
ideal building material as it can be cut to an exact size and will
integrate brick and stone structural commendably. Galvanized steel
Provides lasting strength. Steel studs may use different gauge and
spacing according to your design needs, The panel have already been
prepared framework in it, Us correct install method. They can be
installed without other flame and make the building durable enough.
Aesthetic
feeling:
The exterior of the sections
can have mortar or coating applied directly on site, or in the
factory, or can be sheeted directly with siding or cladding as the
project requires. They can also have stucco, wall covering, tiles,
marble or other different finish styles to meet your aesthetic
needs.
Wide
Application:
Our building systems could be
widely used in exterior wall and partition of villas, residential
houses, workshops, cold store, civil engineering, mobile toilets,
rubbish centers, transformer substations, sentry boxes and other
prefabricated houses.
Cost
Competitive:
With the savings in
construction time and labour and skill base requirements the Aidmer
Building system is more economical and faster. The construction time
is only 1/3 of traditional construction materials such as lumber and
concrete. Integrated steel frame can save most of other accessorial
materials which are necessary in other building system. Excellent
heat insulation can decrease the cost of heat and cold. General cost
of self heat insulation composite wall material is obviously more
economical. |
|
 |
|
|
Aidmer System 
